QEO FL 10-CROSS Mode D'emploi page 11

Press the button H-V again:
- the ON/OFF LED is illuminated continuously
- the horizontal laser line only is switched on
- the self-levelling mode is activated; if the instrument is
tilted (out of compensator range) the horizontal laser line
is blinking
Press the button H-V a third time:
- the ON/OFF LED is illuminated continuously
- the vertical and the horizontal laser line are switched on
= laser cross
- the self-levelling mode is activated; if the instrument is
tilted (out of compensator range) both laser are lines blinking
Press the button H-V again:
- the ON/OFF LED is off
- the instrument is now off
EN
11