Baninni CARSEAT FIERO BNCS001 Mode D'emploi page 20

MANUAL
1. Certification
ECE = European Standard for Safety Equipment
The child safety seat has been designed, tested and sertified according to the require-
ments of the European Standard for Child safety equipment ( ECE R 44/04 )
The seal of approval ( in a circle ) and the approval number are located on the approval
label ( sticker on the child safety seat ).
This approval will be invalidated if you make any modifications to the child safety seat.
Only the manufacturer is permitted to make modifications to the child safety seat.
Warning:
Do not use with 2-point belt. Please install with the 3-point belt.
Please observe the regulations applicable to your particular coun-
try.
The safety belt must be approved to ECE R 16 or a comparable
standard.
Do not use with 2-point belt.
Can be used of the vehicle seat is equipped with a 3-point belt.
MANUAL CARSEAT FIERO C1610.indd 20
Child safety
Fiero BNCS001
Tested and certified accord-
ing to ECE R 44/04
Group: Weight:
8/29/2016 2:21:58 PM