Technical Data - Tecsis P3961 Instructions De Service

7. Technical Data

Models
Display
• Accuracy
• Conversion rate
Measuring ranges
to EN
Type of pressure
Overload limit
Parts in contact
with material
measured
Pressure connector
Stability per year
Memory
Programming
mode Parameters
• Password
• Tare
• Automatic
switch off time
• Measuring unit
Illumination of
display
Voltage supply
• Operating life
1)
Measuring deviation to IEC 6198-, including non-linearity, hysteresis,
deviation of zero point and upper range value
30 Betriebsanleitung / Operating manual / Instructions de service / Instrucciones de uso
P3961 with 9999 digit, 7 segment
P396 with 19999 digit, 7/14 segment, second display
11 mm high, bar graph display
0,5 % o.F.S. ± 1 digit
5 /sec
0... bar to 0...700 bar, others on request
Positive overpressure, negative overpressure
Twofold, max .1000 bar
Measuring ranges
Measuring cell ceramic
Measuring ranges
measuring cell thin-film technology
G ¼ B, ¼ NPT, other connectors on request
± 0, % o.F.S. under reference conditions
MIN/MAX (not volatile even when changing batteries)
P3961: without, P396: settable
P3961: without, P396:
P3961: without
P396: 0/15/30/60/10 min.
bar, PSI MPa selectable
P3961: without
P396: with
 x 1.5V Mignon cell AA
4000h (AA 000 mAh)
1)
50 bar stainless steel; ceramic; NBR,
100 bar only stainless steel,
0% o.F.S. settable
GB