12.6,
AUtoMAtICALLY RInsInG tHe UnIt.
Each unit can automatically be rinsed operating as follows:
•
Remove the filter holder (1) from the unit (2) and empty out the coffee grounds.
•
Remove the filter from the filter holder and mount the blind filter (3) provided.
•
Pour specific detergent for coffee machines into the blind filter (3) (for the amount, see manufacturer's instructions).
•
Start the machine as described in the relative paragraphs.
•
Mount the filter holder (1) with the blind filter on the unit (2).
Semiautomatic version.
•
Simultaneously press the buttons "
rinsing program of about 5 cycles.
•
You can stop the rinsing cycle by pressing one of the two buttons "
Automatic version.
•
Press the button "
rinsing program of about 5 cycles.
•
You can stop the rinsing cycle by pressing any one of the buttons on the selector knob.
2
3
1
32
" and "
"; the LEDs on the two buttons will come on flashing until the end of the
" and then the button "
"; the LEDs on the two buttons will come on flashing until the end of the
" or "
".
SEMIAUTOMATIC
VERSION
AUTOMATIC
VERSION