Vibiemme LOLLO Manuel D'instructions page 72

1
O N
O F F
2
26
12.1,
PRePARInG tHe MACHIne.
•
Check that the water supply tap upstream of the machine is open.
3
•
Check that the magnetothermal differential switch upstream of the machine is
set to ON.
5
•
Start the machine by setting the switch (1) to ON; the LED (2) will come on.
•
The water in the boiler will automatically start heating up indicated by the LED
(3) coming on.
•
Wait until the set temperature has been reached indicated by the LED (3) going
O N
off; the pressure indicated on the pressure gauge (4) must be 1 bar (0.1 MPa).
•
Set the switch (5) to ON to start operation of the cup heating plate heating
O F F
elements; the LED (6) will come on.
•
Place the filter holders in the relative units.
•
Position the cups possibly facing up.
6
4
W ARNING: Only cups, mugs and glasses and no other objects may
be placed on the cup heating plate.
Dry the objects before placing them on the cup heating plate.
12,
oPeRAtIon.