Bigben TD115 SPS Mode D'emploi page 19

Operating the turntable
Prior to use, please make sure to release the tonearm.
1. Press the Power on / Standby mode (7) on the turntable's rear panel.
2. Establish a successful connection with the Bluetooth speakers as per the above steps
3. Place a record on the turntable over the central spindle (Place the 45 RPM adaptor over the central
spindle when playing 45 RPM records)
4. Set the Speed Selector to 33 or 45 RPM according to the record's speed.
5. Turn the Auto Stop (10) to the ON position. The turntable plate will move & swivel over the record
automatically.
6. Release the tonearm holder & remove the protective cap from the stylus
7. Lift the tonearm using the tonearm cue lever (2).
8. Move the tonearm to the beginning of the record, or to the start of a track.
9. Gently lower the tonearm onto the record using the tonearm cue lever (2) to start playing.
10. Turn the volume (5) up or down to enjoy the music.
11. Once the record is done playing, the tonearm will automatically lift from the record and return to
the tonearm holder. To stop manually, lift the tonearm using the tonearm cue lever (6) and return it
to the tonearm holder. Lock the holder.
12. Press the Power button (standby mode [7]) on the turntable's rear panel to turn the unit off when
playback is finished
13. Replace the protective cap on the stylus when not in use.
In the ON position, 33 RPM records will automatically stop when the end of the record is reached.
To play entire 45 RPM records, turn the Auto Stop function OFF.
Note: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the tonearm clamp could result in damage to the
tonearm.
Replace the protective cap on the stylus when not in use.
RECORDING AND STORING MUSIC FROM TURNTABLE TO COMPUTER
You can record your favourite songs on vinyl in MP3 format and store them on a computer.
Installing the Audacity Software
Go to the website http://www.audacityteam.org/download/ to install the Audacity software on your
computer.
• Click on "My Computer" on the desktop.
• Double-click "Audacity Set Up" to install the Audacity software. Follow the on-screen instructions.
Connecting the USB Cable (Included) to the Computer
1. Connect the provided USB cable to the PC port (12) on the rear panel and to your computer.
2. Follow the on-screen instructions to install the USB driver.
- EN 6 -