Safety Precautions For Compressor Components - Haussmann Xpert XAC228 Manuel De L'utilisateur

IMPORTANT SAFETY RULES
4. DO NOT USE THE EQUIPMENT IF IT CANNOT BE SWITCHED ON OR OFF.
Have your equipment repaired before using it.
5. DISCONNNECT THE PLUG FROM POWER BEFORE MAkING ANY
ADjUSTMENTS. Changing attachments or accessories can be dangerous if
the equipment could accidentally start.
6. STORE IDLE EQUIPMENT. Store equipment in a dry area to inhibit rust.
Equipment also should be in a high location or locked up to keep out of reach
of children.
7. DON'T FORCE THE EQUIPMENT. It will do the job better and more safely at
the rate for which it was intended.
8. USE THE RIGHT EQUIPMENT. Don't force a small piece of equipment
or attachment to do the work of larger industrial equipment. Don't use any
equipment for a purpose for which it was not intended.
9. CHECk FOR DAMAGED PARTS. Before using this equipment, any part that is
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment of moving parts, binding
of moving parts, breakage of parts, mountings, and other conditions that may
affect its operation. Inspect screws and tighten any ones that are loose. Any
part that is damaged should be properly repaired or replaced by an authorized
service centre unless otherwise indicated elsewhere in the instruction manual.
Have defective switches replaced by an authorized service centre. Don't use
the equipment if switch does not turn it on and off properly.
10. NEVER USE THIS EQUIPMENT IF IT IS LEAkING AIR; HAS MISSING OR
DAMAGED PARTS, GUARDS, OR SHIELDS; OR REQUIRES REPAIR. Make
sure all screws and caps are securely tightened.
11. DO NOT USE THE AIR HOSE TO MOVE THE COMPRESSOR. Release the
pressure in the storage tank before moving.
12. MAINTAIN EQUIPMENTS WITH CARE. Keep equipment clean for better
and safer performance. Follow instructions for lubricating and changing
accessories. Keep dry, clean and free from oil and grease.
13. DO NOT ATTEMPT ANY MAINTENANCE OR ADjUSTMENT WITH THE
COMPRESSOR IN OPERATION, the power connected, or air under pressure
in the system.
SERVICE
1. CHECk FOR DAMAGED PARTS. Make frequent inspections for the correct
function of components and safety mechanism.
2. REPLACEMENT PARTS. When servicing, use only identical replacement parts
and fasteners recommended by us.
3. SERVICE AND REPAIRS should be made by qualified repair technicians at an
authorized repair centre. Improperly repaired equipment could cause serious
shock or injury.
4. EMPLOYERS MUST ENFORCE COMPLIANCE WITH THE SAFETY
WARNINGS and all other instructions in this manual. Keep it available for use
by everyone assigned to use this equipment.
SAFETY PRECAUTIONS FOR COMPRESSOR
COMPONENTS
1. AIR ONLY: use this compressor for compressing air only. Do not compress
other gases.
2. TANk SAFETY VALVE: This valve prevents damage to the air receiver if
a malfunction in the compressor pump occurs. It is factory pre-set at a limit
specific to your particular model and adjustment. Do not tamper with it. This will
automatically void your warranty.
21