Functional Description - Milwaukee 48-22-8561 Manuel De L'utilisateur

Banc de travail mobile de 1,5 m

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

GROUNDING

Improperly connecting the ground-

WARNING

ing wire can result in the risk of

electric shock. Check with a qualified electrician

if you are in doubt as to whether the outlet is

properly grounded. Do not modify the plug pro-

vided with the bench. Never remove the ground-

ing prong from the plug. Do not use the bench if

the cord or plug is damaged. If damaged, have it

repaired before use. If the plug will not fit the

outlet, have a proper outlet installed by a qualified

electrician.

Benches with Three Prong Plugs

Benches marked "Grounding Required" have a

power strip with a three wire cord and three prong

grounding plug. The plug must be connected to a

properly grounded outlet (See Figure A). If the

power strip should electrically malfunction or break

down, grounding provides a low resistance path to

carry electricity away from the user,

reducing the risk of electric shock.

The grounding prong in the plug is

connected through the green wire

inside the cord to the grounding sys-

tem in the power strip. The green wire in the cord

must be the only wire connected to the power strip's

grounding system and must never be attached to an

electrically "live" terminal.

Your power strip must be plugged into an appropriate

outlet, properly installed and grounded in accordance

with all codes and ordinances. The plug and outlet

should look like those in Figure A.

SYMBOLOGY

Warning

Read Operator's Manual

Electrical Shock Hazard

Do not open more than one drawer at a

time. Bench may tip, causing injury.

Lock wheels when bench is not

being moved. Unlocked wheels can

allow the bench to move

unexpectedly.

Do not use drawers as steps. Bench

may tip, causing injury.

FPO

Lock all drawers before moving the bench.

Do not step on side shelf. Shelf may

collapse or break. Bench may tip, causing

injury.

Cat. No. ................................................ 48-22-8561

Two-Slide Drawer Capacity .........100 lbs. (45.4 kg)

Four-Slide Drawer Capacity ........200 lbs. (90.7 kg)

Peg Board Capacity.....................200 lbs. (90.7 kg)

Total Capacity ..........................2200 lbs. (997.9 kg)

Recommended Ambient Operating

Temperature ...........0°F to 104°F (-18°C to 40°C)

Fig. A

1. Peg board

2. Tool hanger

3. Wood work surface

4. Cabinet shelf

5. Cabinet shelf clip

6. Key

7. Swivel caster with

brake

8. Drawer divider

9. Lock

10. Rigid caster

11. Tool organizer

CAUTION

bench. Do not use power tools to assemble

bench. Tighten bolts with hand wrenches.

Phillips

screwdriver

SPECIFICATIONS