Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INSTRUCTIONS
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in serious in-
jury. Save all warnings and instructions for future
reference.
•Use the bench and accessories in accordance
with these instructions and in the manner in-
tended, taking into account the working conditions.
Use of the bench for operations different from those
intended could result in a hazardous situation.
•Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
•Fully assemble the bench according to the as-
sembly instructions. Do not leave off any pieces.
•Do not modify the bench in any way. Use only
specifically recommended accessories. Drilling
holes or modifying the bench will lower the load
capacity, which can cause the bench to collapse,
resulting in injury.
•Lock wheels when bench is not being moved.
Unlocked wheels can allow the bench to move
unexpectedly.
•Keep the bench on a level surface. Do not load,
unload, or park bench on an incline. The bench
may become unbalanced and tip, resulting in injury.
•Always balance the bench load to avoid tipping.
Unbalanced benches are more likely to tip when be-
ing moved or when using the bench work surfaces.
Evenly distribute the weight front to back and side
to side. To help prevent the bench from tipping,
load the product starting with the bottom drawers.
• Do not exceed the maximum product weight,
including contents. Do not exceed the maximum
weight for each drawer. Overloaded benches can
tip, collapse, or damage drawer slides.
• Do not open more than one drawer at a time.
Bench may tip, causing injury.
•Keep children and bystanders away while load-
ing, unloading, and moving bench. Distractions
can cause you to lose control.
•Only lift the bench according to the instructions
in this manual. Never lift by the side handle. Other
methods may be dangerous, resulting in injury.
• Only transport the bench when empty. Properly
secure when transporting.
• Do not mount the bench on a truck bed or any
other moving object.
• Lock all drawers before rolling the bench. The
drawers could come open and make the bench
unstable and tip.
• Only roll the bench short distances by using the
handle provided.
• Secure all items before rolling the bench. Loose
items could shift, causing the bench to become
unstable.
• Do not use drawers as steps. Do not stand
on the bench. Bench may tip, causing injury.
• Do not step on side shelf. Shelf may collapse or
break. Bench may tip, causing injury.
•Do not use bench in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. This equipment has internal arcing or spark-
ing parts. Bench should not be located in a recessed
area or below floor level.
•Bench plugs must match the outlet. Never mod-
ify the plug in any way. Do not use any adapter
plugs with earth (grounded) chest/cabinet power
strips. Unmodified plugs and matching outlets will
reduce risk of electric shock.
•Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
•Maintain bench. Check for misalignment or binding
wheels, breakage or bending of drawer slides or
other parts and any other condition that may affect
the bench's operation. Do not use damaged bench.
•Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•Have your bench serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the bench is
maintained.
Federal Communications Commission
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
3
Publicité
Table des Matières
