Insignia NS-1DRVCR Guide De L'utilisateur page 8

Back panel
COMPONENT
OUTPUT (Y Pb
Pr)
2 INPUT 1 (VIDEO,
AUDIO L and
AUDIO R)
3 AC power jack
4 DIGITAL AUDIO
OUTPUT jack
5 S-VIDEO
OUTPUT
6 AUDIO OUTPUT
(left/right)
7 VIDEO/AUDIO
OUT (VIDEO,
AUDIO L and
AUDIO R)
Do not touch the inner pins of the jacks on
the back panel. Electrostatic discharge may
cause permanent damage to the recorder.
8
2
1
4 5 6 7
Connect to the component input
jacks on a TV (if available).
Connect to the video and audio
output jacks on an external source,
such as a VCR or camcorder, to
this jack.
Plug into an AC power cord into
this jack.
Connect to the digital audio coaxial
jack on an external amplifier, such
as a Dolby Digital decoder.
Connect to the S-Video input jack
on a TV.
Connect to the audio input jacks
(left and right) of a TV, amplifier, or
other equipment.
Connect to the video and audio
input jacks (left and right) of a TV.
www.insignia-products.com
Remote control
1
Button
POWER
EJECT/OPEN/
CLOSE
3
Function