Turning The Unit On; Turning The Unit Off; Starting Up The Navigation; Checking Gps Status - Sony NVX-P1 Mode D'emploi

Turning the unit on

1
Plug the car battery adaptor into the
power jack of the unit, and the other
end into the car cigarette lighter
socket.
2
Pull out the GPS receiver to a
horizontal position to receive GPS
signal, then press ! for 1 second.
Tip
You can connect the unit to a mains outlet using the
supplied AC power adaptor.

Turning the unit off

1
Push down the GPS receiver until it
clicks into place.
2
Press and hold !.
The message appears.
3
Press (OK).

Starting up the navigation

1
After turning the unit on, select the
desired language using </M/,/m,
press (OK), then press
The warning display appears.
2
Read the warning display, select
"Accept" using </,, then press
(OK).
The tutorial displays appear.
3
Press repeatedly to proceed.
The main menu display appears.
Tip
You can set not to show the language selection display
or tutorial displays when turning the unit on in the
following 2 ways:
– Select "Do not show on startup" on each display.
– Set from the "Preferences" display (page 18).
10

Checking GPS status

You can check the GPS status from the road map
displays.
* Lights up in green and indicates signal strength.
Lights up in red when signal has been lost.
.
GPS strength indicator*