Honda Power Products UMC425E Manuel De L'utilisateur page 59

c. Press the priming pump several times until all fuel left in the fuel
return tube is returned into the fuel tank.
PRIMING PUMP
FUEL RETURN TUBE
(TRANSPARENT TUBE)
d. Tip the engine toward the fuel filler neck again to drain the fuel left
in the fuel tank into the container.
e. Tighten the fuel tank cap securely after draining the fuel completely.
NOTE:
• Deteriorated gasoline may cause unexpected damage to your engine.
• Gasoline should be stored in a clean container used exclusively for
gasoline.
• Gasoline should be stored in a cool and well ventilated place.
3.Change the engine oil (see page 43).
4.Clean the air cleaner (see pages 45, 46).
5.Remove the top cover and remove the spark plug and pour about a
tablespoon of clean engine oil into the cylinder.
6.Crank the engine several revolutions to distribute the oil, then
reinstall the spark plug. Pull the starter grip slowly until resistance is
felt. Reinstall the top cover.
7.Move the choke lever to the CLOSED position (see page 35).
8.Cover the power head and store in a dry, dust-free area.
56
FUEL TANK CAP