Technical Specifications; Led Signals - power2max NGeco Manuel De L'utilisateur

Technical specifications

Weight
Power source
Battery life
Transmission standards
Accuracy
Transmitted data
Transmitted data, optional
additional features
Decorative colors
RAnGE OF MEASUREMEnT AnD DISPLAy
Power
Torque
Cadence
Optional: Left-Right Balance
Optional: Pedal Smoothness

LED SIGnALS

Green blinking
Red blinking short
Directly after activation:
3 x green
2 x green
1 x green
1 x red short
1 x red long (5 seconds)
depending on the version – details on the website
battery CR2450
approx. 400 hours of active power measurement
ANT+ Power Only Profile
BLE Cycling Power Profile
± 2 %
Power
Cadence
Left-Right Balance
power left = pressure on the left pedal + pull on the right pedal
power right = pressure on the right pedal + pull on the left pedal
Pedal Smoothness (both legs combined)
Torque
- Active thermal correction
- Automatic zero-point adjustment
- Calibration is independent of chainring selection
- No magnet necessary for cadence measurement
power2max green, white, red, blue, black
10–2999 W
0–250 Nm
20–250 RPM
0–100 %
0–100 %
power meter activated,
ANT+ and BLE active for pairing with head unit
power meter error
battery charged 60–100 %
battery charged 40–60 %
battery charged 20–40 %
battery charged 10–20 % (equates to "weak battery")
battery charged 0–10 %
27