hager TX 450 Manuel D'utilisation page 41

6
Configuration mode
➜
Lighting, heating, other values
These 3 parameters are used in the same way.
In this example:
• Select Heating using the
touch pads.
• Press the
The screen then displays a request
to enter text and/or an icon.
• Press the
Text entry.
• Enter text and/or an icon (see para-
graph 6.1).
• Press the end touch pad to access
Status Indication.
Status Indication is displayed either in the form of an
Icon, or in the form of Dynamic text to be entered.
One could, for example, associate the word "Comfort"
with icon , and the word "Reduced" with icon
• Select Icons or Dynamic text
using the
pads.
• Press the
78
and
touch pad to confirm.
touch pad to access
.
and touch
touch pad to confirm.
➜
Physical values
This menu is used to measure, by
means of sensors in the installation,
the external temperature, the lumino-
sity or the wind speed.
• Select a parameter using the
and
• Press the touch pad
➜
Logical functions
This menu is used to display a
summary of the status of several
items in the installation.
For example, all the lights on the
1st floor are out.
• Select a parameter using the
and
• Press the
• Enter either text or an icon (see
paragraph 6.1).
For further information, refer to the TX100 user
manual, paragraph on "Menu operation, measure-
ments and settings".
79
touch pads.
to confirm.
touch pads.
touch pad to confirm.
hager