Safety Precautions; Functions - Ibiza sound BT15A Mode D'emploi

Safety Precautions

The installation of this speaker cabinet must be carried out by
•
standards.
Do not attempt to clean the plastic enclosure
•
Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment or smoke
•
machines.
Do not expose the
•
and will be hazardous.
Do not stack the speaker cabinet
•
Additional precautions for amplified devices of the series.
Before installation, ensure that the voltage and frequency
•
requirements of the loudspeaker.
Disconnect from the mains prior to making connections
•
Make sure that the power-cord is never crimped nor damaged by sharp edges. Never
•
come into contact with
Replace the fuse only by a fuse with the same specifications as the original
•
Warning
Before connecting or operating your new speaker, please read the instruction manual carefully.

Functions

1. USB Player
2. Volume 1: Controls the Volume of the
Microphone input.
3. 1/4Jack for Mic input
4. XLR Connector for Mic input
5. Volume 2: Controls the Volume of line in
6. Balanced RCA connector for devices like CD,
Tuner or mixer, etc.
7. XLR line in to device like CD, Tuner or mixer
8. Jack 3.5mm connector for devices like Mobile phone
9. XLR Line out to another active speaker
10. Equalizer: Controls the tone level of the high frequencies at
range -12dB to + 12dB
11. Equalizer: Controls the tone level of the low frequencies at
range -12dB to + 12dB
12. Clip LED: it lights up when the applied input signal reaches the
level of distortion. Reduce the input level in order to avoid
distortion.
13. Volume 3: Controls the volume of MP3
14. Power Switch: It allows to switch the unit on / off
15. Mains socket: Connect here an IEC mains power cable.
Bluetooth pairing procedure
- Press MODE button to toggle between USB/SD input and Bluetooth
- The Bluetooth icon flashes if the unit is not paired
- The unit is identified as "Bluetooth"
- The paring code is "0000"
- The Bluetooth icon remains steadily light up when the unit is paired.
Max. power ...................................................................................500W
RMS power ...................................................................................250W
Woofer size .......................................................................... 15"/38cm
Woofer coil size .................................................................................2"
Woofer Magnet ............................................................................ 45 Oz
Woofer impedance .................................................................... 4 ohms
Horn driver ......................................................................................... 1"
HF driver protection ........................................................................ PTC
Crossover frequency point ............................................................ 2kHz
Frequency response ............................................................ 50Hz-20kHz
Sensitivity 1W/1m .......................................................................... 94dB
Weight ........................................................................................... 16kg
Dimensions ............................................................. 410 x 360 x 690 mm
©Copyright LOTRONIC 2012
speaker cabinet to direct rain or water.
in a manner that could cause injury if a cabinet becomes dislodged.
other cables. Only handle the power-cord by the plug.
GB
F
qualified persons following the approved safety
with solvents or petrochemical based cleaners.
Liquid getting
of power outlet match
to the speaker.
MODE Exchange between USB / SD / BLUETOOTH
BT15A
into the box will risk a short circuit
the power
let the power-cord
one.
Play/Pause
Repeat
Last
Next
Bluetooth
2