Intended Use; Delivery Content - VOLTCRAFT 511568 Mode D'emploi

3. Intended use

Connection and operation of extra-low voltage consumers with an operating voltage of 3V – 15V/DC for model
SPS 1525/1540 PFC or 1V – 15V for model SPS 1560 PFC to the connecting jacks.
The power consumption of a connected consumer may not exceed 25 A for the SPS1540 model, 40A for the model
SPS1540 and 60 A for the 1560 model.
The switched-mode mains power supply is designed in compliance with protection class 1. It is only approved for
connection to shockproof sockets with protective grounding and an alternating current of 230V~ /50 Hz commonly
used in households.
Operation is impermissible under unfavourable ambient conditions. The following are unfavourable ambient conditions:
- Moisture or excessive humidity
- Dust and combustible gases, vapours or solvents
- Thunder and lightning or similar conditions such as strong electrostatic fields etc.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can result in short circuits,
fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this prod-
uct available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

4. Delivery content

• Variable switched-mode mains power supply with PFC
• Operating instructions
Up-to-date Operating Instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
16