Specifications - Echo DCS-1600 Manuel D'utilisation

Specifications

Mass:
without battery, guide bar, saw chain and chain oil
with battery, guide bar, saw chain and chain oil
External Dimensions: length × width × height
(with battery)
Volume:
Tank for chain lubrication oil
Oil (Chain oil)
Cutting length:
All specified usable cutting lengths of guide bar
Chain:
Specified pitch
Specified gauge (thickness of drive links)
Type of guide bar
Guide bar gauge
Type of chain
Chain speed at maximum motor speed
Lubrication
Sprocket: Specified number of teeth
Battery:
Type
Pack voltage
Charger type
Charger input voltage
Charger Lights:
Charge Time:
Sound Pressure Level: (EN60745-2-13)
Sound Power Level: (EN60745-2-13)
Uncertainty
Vibration levels: (EN60745-2-13)
Front handle
Rear handle
Uncertainty:K
These specifications are subject to change without notice.
The declared vibration total value has been measured in accordance with a standard test method and may be used for com-
paring one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Specifications
DCS-1600
kg 3.1
kg 5.8
mm 461 × 225 × 263
mL 380
Special chain oil or motor oil
mm 350
mm 9.53 (3/8 inch)
mm 1.1 (0.043 inch)
cm 35 (ECHO)
mm 1.1 (0.043 inch)
Oregon 90PX
m/s 19.0
mm Automatic oil pump
6
Li-Ion
V 56 (rated 50.4)
CCCV
V AC 220 - 240
Red LED – Battery is outside charging temperature
range
Red LED Blinking – Fault
Green LED – Battery finished charging
Green LED Blinking – Battery is charging normally
LBP-560-100 battery: Approximately 42 minutes.
LBP-560-200 battery: Approximately 88 minutes.
LBP-560-900 battery: Approximately 336 minutes.
dB(A) 91.4
dB(A) 98
dB(A) 3.0
m/s² 3.6
m/s² 3.9
m/s² 1.5
36