weasy CK490 Manuel D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
SLICING/CHIPPING
1. Firstly assemble the driving shaft into the motor base, make sure it is clipped into position.
2. Place the jar on the motor base and turn it clockwise until it locks into position. Make sure it is
assembled in place correctly, otherwise the appliance will not operate.
3. Insert the circle blade assembly into the driving shaft in the jar securely.
Note: if you want to slice, make the surface with slicing blade upward during assemble the circle
blade assembly; if you want to chip, make the surface with chipping hole upward.
4. Place the lid onto the jar and turn it clockwise until the tab of the lid clicks into slot in the jar
handle. Make sure it is locked in position correctly, otherwise the appliance will not operate.
5. Press the corresponding speed button according to your task.
Note: the slicing/chipping blade can slice/chip thickly-potatoes, onions, thinly-cucumbers,
boot root, apples, and carrots...
6. Use the pusher to feed food into the feeding funnel. The food shall be cut into proper size to
suitable for the feeding funnel (the length of food shall be less than 120mm). You can slice/chip
up to 500g of food.
7. The total operating time should not more than 60s.
8. Press the "OFF" button and unplug unit after processing. Remove the circle blade ass'y by its
hub Unlock jar by turning it in anti-clockwise away from its base, and lift it off. Empty the
processed food.
CAUTION: The circle blade assembly is extremely sharp, handle with care.
CLEANING
1. Disconnect the power supply before cleaning.
2. Empty the jar, dismantle all detachable parts and rinse
them in warm soapy water. Extreme caution must be
taken when handling disks as they are very sharp. Then
dry thoroughly.
3. Wipe the outside of base with cloth. Never immerse it in
water as electric shock is possible to occur. Then dry
thoroughly. Ensure the interlock area is free of food
particles.
Note: Some food may discolor the circle blade disk.
This is normal and will not harm the plastic or affect the
flavor of food. Rub with cloth dipped with vegetable oil
to remove discoloration.

Publicité

Table des Matières
loading

Produits Connexes pour weasy CK490

Table des Matières