Digital 5220 Série Guide D'installation page 6

4
Connect the cables and power cord
1. Connect the mouse.
2. Connect the keyboard.
3. Connect the monitor signal cable.
4. Connect the monitor power cable.
5. Connect the 10/100Base-T network cable.
6. Connect the ac power.
NOTE
Some large screen monitors (17-inch diagonal and over)
require more power than the server's auxiliary ac outlet
can supply. These monitors will have power cords that
must be connected directly into a wall outlet.
6
NOTE
If you have a secondary power supply, connect the
remaining ac power cord to the secondary power supply,
then to your power outlet.
CAUTION
Do not attempt to modify or use an external
100 Vac (Japan only) or 115 Vac power cord for
240 Vac input power. Modifying either cord can
cause severe equipment damage.
DIGITAL Server 5220 Series