Digital 5220 Série Guide D'installation page 5

3
Install any internal options
A
If you have options to install, install them now. To install
internal options:
CAUTION
Before touching any circuit board or component,
wear an anti-static wrist strap, properly grounded
to the server chassis, or touch the metal frame to
discharge any static electricity.
1. Unlock the doors.
2. Unlock the side panels.
3. Remove the side panels.
4. Install the options.
Installation Guide
CAUTION
Removing the side panels activates the power
interlock switches. These switches turn off power
to your server. You might injure yourself or
damage the server if you attempt to override or
bypass these switches. Always replace the side
panels before you turn on power to the server.
Before touching any circuit board or component,
wear an anti-static wrist strap, properly grounded
to the server chassis, or touch the metal frame to
discharge any static electricity.
NOTE
Use the brake located at the bottom of your server
lock your server in place.
Refer to the System Reference manual for detailed infor-
mation. Also, refer to the documentation that came with
the option kit for specific installation instructions.
A to
5