BeeWi BC7PW Guide D'utilisation page 7

7
Important: Check that your device (iOS or Android) is connected to a 2.4 GHz Wi-Fi
and not to a 5 GHz. If your phone is connected to a 5 GHz Wi-Fi please go to your
router (internet box) settings to temporarily disable 5Ghz frequency during pairing.
Input correct Wi-Fi password and "Next", then the camera will try to connect, if
connected, "Add success" appears, and it will go back to the Camera page, and shows
"online". If it fails to connect, please tap "try again" and repeat the process for 2-4
times.
Tip: During configuration, please make sure the mobile phone is close to the camera.
The whole process should be finished within 5 minutes of power on. Otherwise, the
camera should be unplugged and powered back.
Immediately after setup go
to:
Advanced Settings > User
Management to change
User and Password
Important Security Warning
(After setup only)
To keep your camera secure
and prevent unauthorized
access, please change the
default password for your
camera.
ENGLISH