Advanced Settings - BeeWi BC7PW Guide D'utilisation

11

2.5 Advanced Settings

User Management (Change User and Password)
In User Management, users can set 3 level of access to
the camera:
- Administrator: Full access rights
- Operator: Can operate the camera, but not access to
advanced settings
- Viewer: Only can view camera. No Pictures or
Recordings.
Note: password shall be no longer than 20 characters
Time Setting
Click «Time Setting» to set time and time zone
FTP Setting
For this function, you need to own a FTP server and have
high skills in IT.
You just should enter your FTP credentials to store pictures on your own server.
Mail Setting
For this function, you need to ask your email provider to provide the server settings.
You should enter your credentials and server settings to receive alert e-mails.
SD/TF Card Setting (Not support in this model)
Click «SD/TF Card Setting» to check the SD card capacity and status. A 64 GB SD
card can store videos continuously up to 3 days.
Enable the "record coverage" to overwrite the old files automatically. Otherwise, when
the SD card is full, recording function will stop.
Users can record videos from 2 to 15 minutes in the continuous mode.
Enable the SD card recording, to record constantly. For example, if record time set at 2
minutes, the camera will record every 2 minutes
Users can set the Recording bitrate (Resolution):
1: 1280x720 Pixels
2: 640x360 Pixels
3: 320x180 Pixels
OSD (On Screen Display) Setting
Click «OSD Setting» to set:
- Overlay time: camera time in live streaming, recording and pictures
- Overlay name: camera name in live streaming, recording and pictures
Reboot camera
Reboot camera if the camera is not working. Please note the specification set will
change once rebooted.
ENGLISH