BeeWi BC7PW Guide D'utilisation page 10

10
Local Picture and Record
During live streaming, users can take snapshots and record to phone. To stop recording,
tap again or exit from the live streaming.
On the main page, in "Picture" and "Record", users can find all the pictures and videos
taken.
SD/TF Card Record Playback (Not support in this model)
If your camera supports it and if a SD Card is installed in the camera, from the
Advanced Settings, users can choose to record or not on the SD card by switching the
SD/TF Recording button.
To view recordings, access to SD/TF Record and Playback. Choose a day in the
calendar, then select Schedule or Alarm click "Done" to see the list of recorded videos
on the SD card.
Alarm Settings
The IP Camera begins recording when it detects
movement/audio and stops recording in 30 sec. In
this section, users can customize the motion detection
feature. This feature can be set on the app or in the web
interface. Motion is detected by changes in the pixels of
the images.
Access to "Alarm Setting" to set Alarm Deployment,
Alarm Action and Time Deployment.
Alarm Deployment
In the Alarm Deployment screen users can set:
Motion Detection Sensitivity: users can choose Low/
Middle/ High sensitivity according to their needs.
Alarm Action
Once the alarm is set, users will receive a notification on the smartphone and can
choose to:
Save Picture to Email: When an alarm is detected, the camera will send two alarm
pictures to the email box. The camera supports Gmail, Hotmail, Yahoo etc.
Save Picture to FTP: When an alarm is detected, the camera will send 2 pictures to
your FTP server, 3-4 pictures will be sent if the motion is enough frequent. Click on FTP
Setting to setup FTP.
Save Picture to SD/TF (disabled): When an alarm is detected, the camera will send 2
pictures to the SD card.
ENGLISH