Display - Avaya Integral D3 mobile Notice D'utilisation

Display

Texts and symbols in the display assist you in operating the handset. They
will guide you through the menus and give you information on the status of
your handset.
The functions of the right and left softkeys change according to the current
status. The respective functions are shown in the display directly above the
softkeys.
The lines in the display
7442
Mauer
Clrdown Menu
Symbol denotations
Battery full
empty
(Battery symbol flashing) Capacity for less than five minutes!
Mute: The microphone is off. Your call partner cannot hear you.
No calling signal: The call signal has been set to Mute or Vibrate.
Lock: The handset is locked.
Handset: The handset has a telephone connection.
Dual-tone multifrequency dialling: Each push of the button is trans-
mitted to the connection subscriber as a DTMF tone, with audible output
(DTMF post dialling). (This symbol is only displayed for Integral 3/5)
Headset: You are telephoning using the headset. The housing micro-
phone and loudspeaker are switched off automatically.
Special function activated: Star key was pressed for a long time.
Loudspeaker: The loudspeaker for handsfree operation on the rear
side of the housing is switched on.
Within range of the system: Your handset is within range of a base
station. You can make and receive telephone calls.
Connection to system: Your handset has an active radio link to the
base station.
Integral Mobile CORS – Integral 33 / CS I55 – Integral 3/5
Symbol line indicating the status of the telephone.
Two text lines e.g. for the name and call number.
Function of the right softkey e.g. Menu. Function of the right softkey e g Menu
Function of the left softkey, e.g. Cleardown. Function of the left softkey e g Cleardown
Battery nearly full Battery nearly empty Battery
7