Table des Matières
Publicité
THANK YOU FOR CHOOSING THE MILKY NOW BABY BOTTLE WATER WARMER
An appliance that makes life easier for parents: make up all your baby bottles to exactly the right temperature in one simple step!
For your safety, we recommend that you always read the instructions in their entirety
• Input: 220 V – 50 Hz.
• Heating power: 800 W.
Milky Now can be used for warm water for your baby bottles or hot drinks (tea, herbal tea, etc.).
BEFORE USING FOR THE FIRST TIME
- Wipe the product with a damp cloth (except the electric plug).
- Add water to the tank and run the cleaning function
Caution: never immerse the electric base in water.
3 FUNCTIONS
∙ for heating your water to the required temperature.
1
∙ for purifying your water by boiling it.
2
∙ for rapidly cooling water using the automatic fan.
∙ for cleaning your Milky Now.
3
1.5 secs
Low water level
When you press the
have selected one of the 3 functions:
fill tank and restart the selected cycle. The "E2" or "E3" messages will disappear after a few seconds.
before using the baby bottle water heater for the first time.
TECHNICAL SPECIFICATIONS
STARTING THE APPLIANCE
before using the appliance for the first time.
STARTING THE 3 FUNCTIONS
1. Plug in the appliance.
2. Place a baby bottle or container underneath the water outlet.
3. Pour water into the baby bottle water heater (1.1L maximum).
4. Switch on the appliance: press the ON/OFF button for 1.5 seconds
appliance and control panel light up.
button, no liquid will come out of the water outlet if the water level is too low. If you
,
MILKY NOW • Instructions for use
• Maximum capacity: 1.1L
• Heating time: 36 seconds**
,
, your appliance will display "E2" or "E3". Add water to the
. The
11
Publicité
Table des Matières
