ENGLISH
The unit does not turn on or turns off automatically:
Check that you have properly connected the adapter jack.
If unit does not receive any signal for some time it automatically turns to standby mode.
Pairing problems with Bluetooth devices:
If the audio quality is poor after pairing Bluetooth with an external device, bring the external device closer to the
tower or remove any obstructions between them.
If the connection between the tower and the device does not occur, check that the coupling function of the device
is enabled; refer to the device manual to enable the function.
If the coupling with the external device is activated and deactivated continuously, bring the external device closer
to the tower or remove any obstacle between them. In some external devices, the Bluetooth pairing can be
switched off automatically to safeguard the consumption of its battery, this is not a malfunction of the device.
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing:
Ensure that the unit is switched on.
Ensure that the Bluetooth function is activated on your Bluetooth device.
The device does not react to any operation:
Disconnect the power cable from the device for 30 seconds to reset it.
TECHNICAL FEATURES
Power source: ...............................................18V
Output power: ...............................................40W
S/N ration: ....................................................≥90db
Speaker drives: .............................................2x 3inch + 1x 1inch
Audio frequency: ...........................................60Hz - 22KHz
Bluetooth power transmission: ......................1mW
Bluetooth transmission: .................................2,4GHz
Unit size: .......................................................110x100x100mm
Base size: .....................................................200x180x15mm
Weight: .........................................................2,9Kg
1A
9
XT 101 BT