Volume Adjustment - Trevi XT 101 BT Mode D'emploi Et Branchement

ENGLISH
"Blue", "Yellow", "carmine", "cyan" and "white".
The mood lights also represent indicators for each mode.
When switch to Bluetooth ode, Blue light flashes, the device is ready for pairing. Once paired, the light stay on, Red
color lights up in Micro SD Card/ USB mode; green color lights up in AUX mode; Carmine color lights up in FM mode,
will flash when in station search status

VOLUME ADJUSTMENT

Press VOL+ (6) button for increase the volume
1.
Press VOL- (5) button for decrease the volume
2.
USB/ Micro SD INPUT
1. Insert a USB memory into the socket (1) or a Micro SD Card into card slot (11) with the metal contacts facing
backward;
2. Turn on the unit and press MODE (7) button on unit
3. Press the (4) button on the unit to pause playback; press again to resume playback;

4. Press (3) o (8) button on the unit while listening to the previous or next track.
9 :
Note:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cables.
- From the computer format the USB memory in FAT (16 or 32).
The USB socket can also be used to charge external devices such as smartphones, MP3 players, etc...
BLUETOOTH
1. Turn on the unit and press MODE button (7) repeatedly and select the BLUETOOTH function, Blue light flashes
and the system will automatically search for external Bluetooth devices to pair;
2. Activate Bluetooth functionality on the external device to pair and start searching for devices. At the end, select
the "XT 101 BT" device;
3. Enter the "0000" password if prompted;
4. Once paired confirmation tone will be output and light stay on;
5. Press (4) button on unit to start playback;

6. Press (3) or
9 :
AUX-IN INPUT
- To use a 3.5mm Stereo jack cable to connect the AUX-IN (10) input on the back of the unit to the audio output
of the TV, DVD, or other device/source;
1. Switch on the appliance;
2. Press MODE button (7) on the unit and select Aux-In;
3. To use commands of external device.
TROUBLESHOOTING
If the Soundbar does not work properly, check this short list before taking it to a TREVI authorised service centre.
In any case, do not try to repair the device, this will void the warranty. Only TREVI authorised service centres are
authorised to perform operations on this product.
No Sound:
Check if MUTE function on AUX mode, or PAUSE function on USB or Bluetooth mode, are enabled.

Check that the correct input has been selected.

Check and adjust the volume of the Soundbar and the TV (or the device connected).

(8) button on the unit while listening to the previous or next track.
;
.
and select USB/ TF Card
8
XT 101 BT
mode;