Product Specifications - F.F. Group OS 320 PLUS Notice Originale

Masquer les pouces

Table Des Matières

Table des Matières

OS 320 PLUS

SAFETY INSTRUCTIONS FOR SANDERS

WARNING: Do not operate this tool until it is

completely assembled and installed accord-

ing to the instructions.

1. Hold your power tool by the insulated gripping

surfaces, especially when performing an opera-

tion where the sanding accessory could contact

hidden wiring.

2. Protect your lungs. Wear a face or dust mask

during operation. Following this rule will reduce

the risk of serious respiratory injury.

3. Protect your hearing. Wear hearing protection

during extended periods of operation. Following

this rule will reduce the risk of serious personal

injury.

4. Inspect power cords periodically and repair them

as needed at your nearest authorized service

center. Constantly stay aware of cord location.

Following this rule will reduce the risk of electric

shock or fire.

5. Check damaged parts. Before further use of

the tool, determine that it will operate proper-

ly and perform its intended function. Check for

alignment, binding or breakage of moving parts

or any other conditions that may affect its op-

eration. A guard or other part that is damaged

should be properly repaired or replaced by an

authorized service center. Following this rule will

reduce the risk of shock, fire, or serious injury.

6. Remove all nails from lumber before using this

tool.

7. Do not use the sander to remove lead-based paints.

WARNING: This product and the dust creat-

ed by power sanding, sawing, grinding, drill-

ing, and other construction activities may

contain chemicals, including lead, can cause

cancer, birth defects, or other reproductive harm.

Wash hands after handling.

Some examples of these chemicals are:

lead from lead-based paints

crystalline silica from bricks and cement and oth-

er masonry products

arsenic and chromium from chemically treated

lumber.

Use the machine only for dry sanding. Penetration

of water into the machine increases the risk of an

electric shock.

CAUTION, FIRE HAZARD! Avoid overheating the

object being sanded as well as the sander.

Always empty the dust collector before tak-

ing breaks. In unfavourable conditions, e. g.,

when sparks emit from sanding metals,

sanding debris in the dust bag, micro filter or paper

sack (or in the filter sack or filter of the vacuum

cleaner) can self-ignite. Particularly when mixed

with remainders of varnish, polyurethane or other

chemical materials and when the sanding debris is

hot after long periods of working.

Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure

than by hand.

VIBRATION SAFETY

This tool vibrates during use. Repeated or long-term

exposure to vibration may cause temporary or per-

manent physical injury, particularly to the hands,

arms and shoulders.

TO REDUCE THE RISK OF ANY VIBRATION-RE-

LATED INJURY:

First be examined by a doctor and then have regu-

lar medical check-ups to ensure medical problems

are not being caused or worsened from use. Preg-

nant women or people who have impaired blood

circulation to the hand, past hand injuries, nervous

system disorders, diabetes, or Raynaud's Disease

should not use this tool. If you feel any symptoms

related to vibration (such as tingling, numbness,

and white or blue fingers), seek medical advice as

soon as possible.

Use tools with the lowest vibration when there is

a choice.

Take vibration-free breaks during each day of work.

Grip tool as lightly as possible (while still keeping

safe control of it). Let the tool do the work.

CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the ma-

chine's rating plate are compatible with the power

supply you intend to connect it to.

This appliance is Class II* and is designed for connec-

tion to a power supply matching that detailed on the

rating label and compatible with the plug fitted. If

an extension lead is required, use an approved and

compatible lead rated for this appliance. Follow all

the instruction supplied with the extension lead.

*Double insulated

earth connection as supplementary insulation is

applied to the basic insulation to protect against

electric shock in the event of failure of the basic

insulation.

GUIDELINES FOR USING EXTENSION CORDS

Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product

will draw. An undersized cord will cause a drop in

line voltage resulting in loss of power and over-

heating.

Always replace a damaged extension cord or have

it repaired by a qualified person before using it.

Protect your extension cords from sharp objects,

excessive heat and damp/wet areas.

Use a separate electrical circuit for your tools. This

circuit should be protected with the appropriate

time-delayed fuse. Before connecting the motor

to the power line, make sure the switch is in the

OFF position and the electric voltage is rated the

same as the voltage stamped on the motor name-

plate. Running at a lower voltage will damage the

motor.