Cleaning The Lid - Polar DB331 Mode D'emploi

Cleaning the lid

Caution:
• As the lid is equipped with
LED lights, NEVER soak
it in any type of liquid for
cleaning.
• During cleaning, Never
let water or any liquid
come into contact with the
electrical parts of the light.
1. Use a clean damp cloth to wipe clean the
bottom part of the lid.
2. Wipe clean the whole outer part.
3. Sanitize the bottom part with a sponge
previously damped with sanitizer solution.
4. Allow to act for 30 minutes.
5. Wipe the bottom part twice or more with a
clean sponge soaked with clean water.
6. Let the lid dry well.
Caution: NEVER attempt to
clean/sanitizer the lid while it is
installed in the appliance.
DB331_DB332_DB843_ML_A5_v2_20210705.indb 9 DB331_DB332_DB843_ML_A5_v2_20210705.indb 9
Re-assembly
1. Apply the seal (A) onto the auger as shown.
Always ensure to check the
seal integrity. Should it be
worn, replace with a new one
immediately. Replace the seal
(A) at least once a year.
2. Using the Vaseline provided, lubricate the seal
(A) in the area as shown.
3. Apply the seal (B), lubricating the entire
surface as indicated by the arrows.
UK
9
2021/7/5 09:43 2021/7/5 09:43