Connection Example - Schwaiger ZA 100 011 Mode D'emploi Et Consignes De Sécurité

USER GUIDE
3. Connect the coaxial cable of the external amplifier to
the aerial input of your DVB-T2 receiver.
4. You can now turn on the television set and the
DVB-T(2) receiver.
5. Switch on the 5 V power supply on the menu of your
DVB-T2 receiver to power the external amplifier via
the coaxial cable.
6. You can now look for channels that you can receive. If
necessary, refer to the DVB-T2 receiver's user manual
for guidance.
CONNECTING THE INDOOR AERIAL FOR DAB+ RADIOS

Connection example:

1. Make sure that the DAB+ radio is switched off.
2. Connect the coaxial cable of the indoor aerial to the aerial connection of the
external amplifier.
3. Now plug the cable of the external power supply unit into the 5 V DC socket
of the external amplifier and the external power supply unit into a 230 V AC
socket.
4. Plug the IEC connector provided (radio IEC connector) onto the coaxial cable
of the external amplifier and then connect the coaxial cable to the aerial
input of your DAB+ radio
5. You can now look for channels that you can receive. If necessary, refer to
the DAB+ radio user manual for guidance.
External power
supply unit
Radio (IEC) adapter
3. Now plug the cable of the external power supply unit
into the 5 V DC socket of the external amplifier and
the external power supply unit into a 230 V AC socket.
4. Connect the coaxial cable of the external amplifier to
the aerial input of your DVB-T2 receiver.
5. When making this connection, it doesn't matter whet-
her the 5 V power supply of the DVB-T2 receiver is
activated or not.
6. You can now turn on the television set and the
DVB-T(2) receiver.
7. You can now look for channels that you can receive. If
necessary, refer to the DVB-T2 receiver's user manual
for guidance.
10