Danby SILHOUETTE DPAC120061 Manuel D'utilisation page 16

Setting the AUTO-ON & AUTO-OFF timer
during the same program.
Before setting the AUTO-ON & AUTO-OFF Timer,
the time of day clock must be set/operational.
You must select all appropriate settings (i.e. MODE,
FAN SPEED, TEMP, HUMIDITY, SWING etc.)
required to operate under the AUTO TIMED
program before initiating the program.
1) Select the appropriate MODE under which you
want the unit to operate (Auto-Cool-Dry-Fan).
2) Select the appropriate FAN SPEED setting,
under which you want the unit to operate.
(Auto, Hi, Med, Low) (excluding
Dehumidifying, as this mode has "1" fan
speed setting only).
3) Select SWING (oscillation) by pressing the
SWING key pad and the "air swing" symbol will
appear in the display window.
4) Press the TIMER-ON key pad (Fig P) to initiate
the AUTO-ON time sequence. TIMER-ON will
appear in the display window (Fig Q) and the
"minute" digits start to flash. Press either TEMP
/TIME keys (Fig R) to select the AUTO-ON
"minutes". Press the TIMER-ON key pad again
and the "hour" digits start to flash. Press the
TEMP/TIME ADJ key pad to select the
AUTO- ON "hour" start time. Press the TIMER-
ON key pad again to set the AUTO-ON time.
5) Press the TIMER-OFF key pad (Fig S) to initiate
the AUTO-OFF time sequence. TIMER-OFF will
appear in the display window (Fig T) and the
"minute" digits start to flash. Press the
TEMP/TIME ADJ key (Fig R) pad to select the
AUTO-OFF "minute" time. Press the TIMER-
OFF key pad again and the "hour" digits start to
flash. Press the TEMP/TIME ADJ key pad to
select the AUTO-OFF "hour" stop time. Press the
TIMER-OFF key pad again to set the AUTO-OFF
time and the current time of day will appear in
the display window. The unit will now "start" and
"stop" automatically at the specified AUTO-ON /
AUTO-OFF times.
You can verify the selected AUTO-ON / AUTO-OFF
times by pressing the TIMER-ON / TIMER-OFF key
pad. The time you selected will appear in the
display.
15
Fig P
Fig Q
Fig R
Fig S
Fig T