E
Make sure that the regulator is set to OFF.
Push the regulator down onto the valve until it
clicks into place.
F
1. Make sure that the regulator is set to OFF.
Lift up the spring-loaded locking collar and
push the regulator down onto the gas cylinder.
2. Push the locking collar down to lock the
regulator onto the gas cylinder.
2. Connect the gas hose to the BBQ and
tighten the hose clamp.
If you notice the smell of gas:
e shows the connection of
The picture shows the connection of a
gas hose in accordance with Swedish standards.
In some countries the gas hose is of a larger
diameter and is pushed all the way onto
the connector.
3. Open the lid and make sure that the gas
control knobs are set to OFF.
4. Open the gas cylinder by turning
the handwheel anticlockwise.
1
. Lift
is pushed
2