Display Mode - Vogel IG502-E Instructions De Service

6. Display mode

Lighting of the LED indicators shows that the
display mode is active. No flashing!
This mode is used to determine which settings
and operating parameters are currently active.
Always start the display mode by briefly
pressing one of the two keys
Step Key
1
Press briefly
2
.
3
4
5
6
7
Page 19
Operating Instruction Universal Control Unit IG502-E
Display
Current operating state is displayed
Example: pause time in timer mode
Display of remaining pause time of current
lubrication cycle
Example: 6.8 h
Display of preset total pause time
Example: 9 h
(factory setting)
Display of pump running time
Example: Timer mode
Example: System is in pause mode, current
tCO cannot be displayed
Display of preset value
Example: 2.6 min
Display of system monitoring
Next Chapter
Central
6
Lubrication