Hand Motion Changes Display; Reset; Safety And Care; Warnings - INOVAXION WOODSTATION INOWSD02 Manuel D'utilisation

HAND MOTION CHANGES DISPLAY

In AUTO mode, the movement sensor is actived. When you put the hand in front of the
WoodStation®, the light display is enabled or disabled automatically by itself. This display
will switch off after 20 seconds if no movement is detected.

RESET

The RESET button is located on the back of the weather station (please to see «BACK VIEW» schematic).
Press on this button to reset the system if the equipment don't work correctly. To use this function, you
need to use the thin point of a pen.

SAFETY AND CARE

Clean regularly your WoodStation® product with a dried rag. Avoid making fall down the weather station,
this product is fragile.

WARNINGS

This product is designed to give you years of service if handled properly.
Observe the following guidelines :
• Never immerse the weather station in water. This can cause electrical shock and damage it.
• Do not subject the weather station to extreme force, shock, or fluctuations in temperature or humi-
dity
• Do not tamper with the internal components
• Do not mix new and old batteries of different types.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a long period of time.
11 2
EN