Getting Started; Batteries; A/C Power Adapter - INOVAXION WOODSTATION INOWSD02 Manuel D'utilisation

EN

GETTING STARTED

The WoodStation® products work either with batteries and/or with A/C power adapter.

BATTERIES

Before the first use, remove the plastic insulator at the back side product to activate the battery pack.
To open the batteries compartment :
1. Bring up the battery door on the weather station's back.
2. Insert the 4 Alkaline batteries 1,5 Volts (LR06) in the batteries pack.
3. Close again batteries compartment.
NOTE. Do not use rechargeable batteries. We advise you the use of Long Lasting Alkaline batteries 1,5
Volts (LR06). The batteries are mainly used in case of power electrical cut and not for a long life product
use. If you notice a continuous unstable display, please change the batteries and plug the product on AC
adapter.

A/C POWER ADAPTER

The power adapter plug is located under the base of the weather station.
To connect the power adapter :
1. Lift the Weather Station.
2. Connect the power adapter plug in the DC 6V port.
3. Make sure to insert correctly the plug until the end of the port so that it does not exceed.
4. Put back the Weather Station.
5. Connect the other extremity of the power adapter in a mural catch (220 Volts).
2 6