tuctuc tive 2.0 Mode D'emploi page 41

INSTRUCTIONS FOR USE THE STROLLER
1. Attaching the front bar in place: slide the bar into the connectors on the front of
the chassis. Unlocking the bar: press on the sides and pull. Locking the bar in place:
press the side buttons and raise the bar.
Also can release the T bar, pressing the metal bottom and pull, this action allows you
to pass thought the footmuff hold.
2. To adjust the front rest level: pull out the lever on the both sides to lower down. To
adjust it to higher position, only need to lift up the footrest. (see F11)
3. To use brakes: To brake: push the wheel brake lever down. To release: lift the rear
brake lever up. (see F12)
4. To use canopy: pull the canopy forward or backward to open or close the canopy.
(see F13)
5. To detach the front and rear wheels: see left photo, press down the steel button in
side and pull out, the front wheel can detach; Press down the steel button in back
side and pull out, the rear wheel can detach. (see F14)
6. To unlock: Lift both swivel lock levers up. To lock: Push both swivel lock lever down.
(see F14)
7. Adjust the backrest: Recline: lower the 'recline' tab to the lowest position on the
backrest. Raise the backrest: pull the belt with one hand and adjust as required; the
backrest will then stay in position automatically.
8.- To use the seat belt: Securing the seat belt: attach the inserts of the shoulder belt
to the buckle until you hear the "click" sound to make sure it is secured. Releasing the
seat belt: press down the button on the buckle, using the other hand to pull put both
side of the inserts. (see F16 and F17)
1 2 3
41