Trilux LMS HFSB/X RMC Mode D'emploi page 9

Group behaviour (operating modes) (factory setting: all)
swarm/
swarm = with movement, only the subgroups respond in which the
all
movement is detected plus the adjacent subgroups.
all = the complete group with all subgroups responds with movement.
Remote Group Setting
The last modified parameter is sent to the group.
send
The complete setting block/parameter block is sent to the group.
last
send
all
Reset
All settings are reset to factory settings. If all subgroups in the com-
reset
plete group are reset to factory settings, the "send all" button (see
Remote Group Setting) must be pressed after resetting the master
luminaire.
Sensor sensitivity
SENS
With erroneous switching caused by moving objects, the sensitivity of
the sensor can be reduced in (10) steps with the (-) button.
N
Button (N) sets the standard sensitivity.
_
9
E