Trilux LMS RGBW Mode D'emploi Et Instructions D'installation page 19

1 2 3 4
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Settings on the 8-pole dip switch
on the rear of the touch panel
If several touch panels (parallel switching of up to 3 touch panels) are used in the
controller, the setting must only be carried out on touch panel 1. All other touch panels
can keep their standard setting (all 8 DIP switches OFF). Programming the controllers
with the smartphone app must only be carried out on Touch 1.
Relay function
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Standard setting
(factory setting)
Relay always switched on (no switching noise).
Relay switches ON if at least 1 DALI channel
has a dim level > 0%. Relay switches OFF if all
DALI channels have a dim level of 0%.
19
E