Trilux LMS RGBW Mode D'emploi Et Instructions D'installation page 15

E
Scene buttons
These buttons call or save scenes.
The appropriate scene is called by briefly pressing the corresponding button. If
the system is switched on, the saved brightness and colour is set. If the system is
switched off, it switches on (to manual mode) and sets the saved brightness and
colour. By pressing and holding the button (approx. 3s) the momentary brightness
and colour temperature of the system is saved in the corresponding scene.
Slider for brightness
Set the brightness of the system with this slider. If the system is switched off, it is
switched on (to manual mode and selected slider brightness). If the system is in
automatic mode, the system switches to manual mode (selected slider brightness,
with light colour adopted from automatic mode).
Slider for colour
Set the light colour of the system with this slider. If the system is switched off, it is
switched on (to manual mode and selected slider colour). If the system is in automatic
mode, the system switches to manual mode (selected slider colour, with brightness
adopted from automatic mode).
15