Publicité
Les langues disponibles
Les langues disponibles
•
Improper use of the appliance;
•
Exceptional and unforeseeable events;
•
Unrespect to domestic legislation on health, hygiene and safety at the workplace;
•
The employer is responsible for the periodic training of the operators about the correct use, safety rules and fire prevention.
2.
TECHNICAL DATA
RANGE OF HEATED MIDDLE SHELVES
Supply voltage
Frequency
Max. power input
Max. current requirement
Power cord
Max. supply Voltage variation
Max. Frequency variation
Max. Frequency variation
WARNING!
3.
INSTALLATION AND COMMISSIONING
WARNING!
Proceed according to the following instruction before connecting the appliance:
Remove the packaging and then the protective film taking care not to scratch the surface;
Make sure the power supply of the appliance shown on the data plate is compatible with the grid voltage;
Check the power supply of the system is set up and able to take the current load, and meets the legal requirements and domestic standards;
The appliance must be earthed;
Plug the appliance. In case of direct connection to the electricity grid (without plug), it's necessary providing for a wall switch, which grants the
complete disconnection according to overvoltage III rate and accordingly to installation rules;
Have the system tested by a qualified electrician, if operation of the equipotential earth connection or the safety of the electrical system is in doubt,
the symbol below identifies the equipotential connection:
The Manufacturer declines all responsibilities in case of connection made by the user or unspecialized staff
WARNING!
This appliance is designed and optimized to ensure high performance and efficiency. The sole use of this appliance is keeping food heated.
V
Hz
W
A
Mmq-H05RN-F
continuous
Short period
The electric power system and the rooms where the appliance is placed have to respect
domestic legislation on safety, accident prevention and fire regulations. On the
contrary the Manufacturer won't assume liability for direct and indirect damages to
people or things.
Intervention on the electric power system must be solely performed by specialized
electricians.
After installation dispose of the packaging according to current regulations.
2L
3L
220-240
220-240
50-60
50-60
400
600
1,8
2,6
3x1,5
3x1,5
+/- 10%
+/- 10%
+/-1%
+/-1%
+/- 2%
+/- 2%
4L
220-240
50-60
800
3,5
3x1,5
+/- 10%
+/-1%
+/- 2%
7
Publicité
