Electrical Instructions; Polarized Plug - Reliable The IronMaven J420 Guide D'utilisation

ELECTRICAL INSTRUCTIONS

To avoid a circuit overload, do not operate another high-wattage appliance on
the same circuit simultaneously with the steam iron.
If an extension cord is necessary, a 15-amp rated cord with a polarized plug
should be used. Cords rated for less may overheat and cause damage.

POLARIzED PLUG

This steam iron system uses a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit into a polarized outlet only one way. If the plug
does not fit fully into the power outlet, reverse the plug. If it still does not fit, con-
tact a qualified electrician. Do not attempt to defeat this safety feature.
WATER INSTRUCTIONS
Your steam iron system has been planned for use with normal tap water. In order
to extend the life of this product, if where you are living the level of water hardness
is very high, we recommend to use 50% of normal water with 50% of deminera-
lised or distilled water. Do not use softened water or well water.
TEST FIRST, THEN IRON
Prior to ironing on delicate fabrics, it is a good idea to do a test in a hidden area
(like the reverse side) to ensure that no damage is done to the fabric. We will not
assume any responsibility in case you do not comply with these instructions.
04