KITCHEN CREW 940590 Mode D'emploi page 30

• Caution: Let the device cool down
completely after use. As long as 'H'
is displayed, the device is still hot.
Do not touch the plate during this
The single induction cooktop is equipped with an overheat protection. If the
cookware becomes too hot, the device switches off automatically. Should the
cookware becomes too hot, wait a few minutes and let the cooktop cool down.
A er that, you can continue to use the device without restrictions
Setting the power and temperature
• After switching on the device,
press the control key to choose
either power or temperature
mode.
• If you press the sensor button
once, the device will be operated
in power mode at 1600 W and the
plate starts heating up.
• Use the preset power level or
touch the +/- sensors to increase
or decrease power. The power can
be adjusted from a minimum of
200 W to a maximum of 2000 W.
• If you press the sensor button
twice, the device will be operated
in temperature mode at 140 °C
and the plate starts heating up.
30
time. If 'L' is displayed, the plate is
still slightly warm. You should still
make sure not to touch it.
• Use the preset power level or
touch the +/- sensors to increase
or decrease temperature. The
temperature can be adjusted
between a minimum of
60 °C and a maximum of 200 °C.
• The display can show power/
temperature or time. If the timer
is selected, the display constantly
switches between power/
temperature and the elapsing
time. If the timer is not selected,
only the power and temperature
settings will be displayed.