6�2�1 Storage Options - Monacor INC-4757PTZ Mode D'emploi

: zooming in
: open iris
: focus near
: autofocus
6.2.1 Storage options
Numerous positions and patterns of movement
can be saved to the camera . There are four dif-
ferent options:
Preset: position and lens setting saved
Track: recording of movements and lens set-
tings performed
Scan: automatic alternation between two
positions / lens settings that have been
defined
Tour: fixed sequence of presets saved previ-
ously
These actions can be retrieved manually or start-
ed automatically when the camera is restarted
or after a phase of inactivity .
View
To save a preset ("Add Preset"):
1� Set the position and the lens�
2� Enter the preset name desired ("Name")�
3� Click  to save�
To retrieve a preset:
Preset
1� Select a preset�
2� Click  to confirm�
To delete a preset:
1� Select a preset�
2� Click  to confirm�
To record a track ("Add Track"):
1� Enter the track name desired ("Name")�
2� Click  to start the recording�
3� Make the settings for movement and lens�
4� Click  to stop the recording�
Track To start a track:
1� Select a track�
2� Click  to confirm�*
To delete a track:
1� Select a track�
2� Click  to confirm�
: zooming out
: close iris
: focus far
Function
View
To save a scan ("Add Scan"):
1� Enter the scan name desired ("Name")�
2� Set the position and the lens�
3� Click  to save the first setting�
4� Set the position and the lens�
5� Click  to save the second setting�
Scan
To start a scan:
1� Select a scan�
2� Click  to confirm�*
To delete a scan:
1� Select a scan�
2� Click  to confirm�
To save a tour ("Add Tour"):
1� Enter the tour name desired ("Name")�
2� Click  to start programming�
3� Select a preset (saved previously)�
4� Define the "Wait Time" for the preset [s]�
5� Click ✔ to save the step�
Repeat steps 3�– 5� for additional presets�
Tour
6� Click  to stop programming�
To start a tour:
1� Select a tour�
2� Click  to confirm�*
To delete a tour:
1� Select a tour�
2� Click  to confirm�
Automatic action after a phase of inactivity:
1� Activate the function with "Enable = ON"�
2� Use "PTZ Type" to select the type of action
(Preset /Scan / Track / Tour)�
Idle 3� Use "Name" to select the name of the action
(saved previously)�
4� Use "Wait Time" to define the phase of inactivity
[min] after which the action will start�
5� Click ✔ to save the settings�
Time-controlled actions:
1� Click "Enable" to activate the function�
2� Select the "Timer Mode":
"Everyday" or "Once"
3� Set the action time;
for "Timer Mode = Once", use "Time" to select
the date
Timer
4� Use "PTZ Type" to select the type of action
(Preset /Scan / Track / Tour)�
5� Use "Name" to select the name of the action
(saved previously)�
Repeat steps 3�– 5� for additional actions�
6� Delete the action (), if required�
7� Click ✔ to save the settings�
Reboot Action
Exten­
automatic action after restart, settings identical to
sion
"Idle"
* will be cancelled when movements or settings are
made or when other presets / tracks / scans / tours that
have been saved are retrieved
Function
21