Calling Up The Camera Via Computer - Monacor INC-4757PTZ Mode D'emploi

6 Calling up the Camera
via Computer
To call up the user interface of the camera, enter
its IP address in the address bar of the program
Windows Internet Explorer (IE, version 6 or high-
er) . The IP addresses of the computer and of
the camera must be in the same subnet . The
number of simultaneous accesses to the camera
is limited to 10 .
When the camera is called up, the log-in
window will appear . Select the language for the
user interface . The description below refers to
English . Then enter the user name and the pass-
word (default setting for both: admin) . If you
use the default password, a request to change
➃
Search program "IPSearch"
the password will appear . It is recommended to
change the password to prevent unauthorized
access . Individual log-in data can also be defined
later in the camera settings . If you change the
password, make sure to remember it!
To make all functions available, installation of
the ActiveX extensions is required . These ex-
tensions will be loaded from the camera when
the camera is called up for the first time . If
necessary, reduce the security settings of the
IE accordingly to allow the installation process .
Save the installation file "NetworkSurveillance .
exe" to the computer, close the IE and execute
the file .
Windows is a registered trademark of Microsoft Corporation in the
USA and other countries.
17