Installation - Mazzoni Flash 650M Manuel D'utilisation Et D'entretien

INSTALLATION

After unpacking the sweeper, install the
handle in operating position and the brush
on the relative support arm according to
the following procedure:

Unscrew locking wheels (1).

Lift the handle to the operating
position (1).

· Reposition wheels (2). Make sure
to tighten them hard in the proper
place on the handle.

Take the brush out of the dirt
container.

Lift the support arm to a vertical
position.

Position the brush against the
rotary support. Make sure that
brush holes and support holes are
matching.

Firmly secure the brush to its
support with the screws supplied
with the product (1).
For FLASH 950 M

Repeat the operation for the
second brush
21
FLASH 650M – FLASH 950M