Table des Matières
Publicité
Wiring:
KICKER KISL
(sold separately)
Observe the polarity of input connections to avoid signal loss.
Use the KICKER KISL for source units with RCA outputs or splice the quick-connect
harness leads directly to your source unit's speaker-level outputs.
If using an LOC please ensure that it is not wired in reverse. Failure to do so will result in
little to no output. KICKER recommends using the KISL as shown above.
quick-connect
harness audio inputs:
White
Left +
White/Black Left –
Grey
Right +
Grey/Black
Right –
4
2011 Hideaway Rev P.indd 4
2011 Hideaway Rev P.indd 4
≤ 24" [60cm]
bare metal
chassis ground
Hideaway™
quick-connect
harness
15A fuse
≤18" [45cm] from positive
battery terminal
remote turn-on
see next page
12V
battery
bare metal
chassis ground
1/26/2021 3:51:56 PM
1/26/2021 3:51:56 PM
Publicité
Table des Matières
