The IP and IPX series high pressure cleaners have been constructed to permit the suction and
mixing of detergents and other liquids from the internal tank.
In the event of direct contact with detergent additives, follow instructions provided by the man-
ufacturer and/or product retailer and rinse the affected body part with clean water.
7.1 - SUCTION FROM INTERNAL TANK OF IP SERIES
Fill as indicated in Fig. 1. Select low pressure on Rototek or Multireg 99 (Fig. 2) Regulate the
quantity of detergent using the +/- knob (Fig. 3).
1
7.2 - SUCTION FROM INTERNAL TANK OF IPX SERIES
Fill as indicated in Fig. 1. Select low pressure on Rototek or Multireg 99 (Fig. 2). Ensure that
the cap is securely closed and in position (Fig.3). Regulate the quantity of detergent using the
+/- knob (Fig. 3).
1
7.3 - SUCTION FROM EXTERNAL TANK IPX SERIES
Remove suction hose from chemical port (Fig. 1). Insert kit "A" in the chemical port (CHEM)
(Fig. 2) and the end with filter into the external tank (B).
7 - HOW TO USE CHEMICAL PRODUCTS
IP
2
IPX
2
L
H
L
H
20
3
3