SBS GO LIFE Série Mode D'emploi page 3

How to secure the speed sensor
Clean well a suitable place on the rear bike fork for the sensor. Do not
install the sensor on the same side of the chain. Put the sensor with
the logo outside (not facing the wheel).
______________________________________
Mount the magnet
1
Unscrew the wheel magnet to install it
on a spoke.
2
Remove the pedal. Place the cadence
magnet vertically on the inner side
of the crank. Before to attach the
magnet, clean perfectly the area.
Reassemble the pedal.
Rubber band
or
Cadence magnet
Nylon cable ties
Wheel
magnet
3