Night Mode - DELTACALOR Dryer Plus Electric Notice D'utilisation Et D'installation

Night Mode

The Night mode allows setting a temperature value lower than the Comfort mode tempera-
ture value. It is suggested to select this operating mode either during the night or when the room
is not occupied for 2 hours or longer.
• Press the MODE key until the
• Set the desired temperature through the
• LED A yellow: resistance OFF
• LED A red: resistance ON
Crono mode
Temperatures of Comfort and Night modes and the operating time intervals can be configured.
To activate the Crono function, hold the
pears on the display. The display indicates Crono and LED 60 turns green.
How to set the time sequence: press the
Setting time and date:
The flashing digit indicates the day of the week: press the
press MODE to confirm.
Use the and keys to set the hour and then
Repeat the same procedure to set the minutes. Press
Setting the weekly program.
The programming starts automatically from day 1; to set the hour, use the
The key sets the Comfort temperature, which is indicated by full bar; the
Night, which is indicated by an empty bar. In order to program the 24 hours, press the
keys: once one of the two keys has been pressed, the program will advance automatically to the
following hour.
• LED A yellow: resistance OFF
• LED A red: resistance ON
Appuyez sur la touche
Lorsque le 7 jour est configuré, le programme revient automatiquement au mode de fonction-
ème
nement précédent.
Night icon appears on the display
and
MODE button down, until the
CRONO key to enter the setting mode.
Example:
MODE pour confirmer et avancer vers le jour suivant.
[ 44 - EN ]
keys (maximum temperature 21 °C)
and keys to set the desired day,
MODE to advance to the minutes setting.
MODE to confirm.
Crono icon ap-
and keys.
key sets the
and