Busch+Müller IXON Eyro Notice D'utilisation page 11

Height adjustments of the light
To avoid dazzling or startling approaching traffic or other road users, adjust the bicycle headlight in a
way to ensure that, on a completely even road, the horizontal edge of the light or the furthest area of the
light field is always visible in the distance!
Fig.: Example of bicycle light adjustment
20
Attention: Ensure blinded-free
alignment of the spotlight!
Fixing ring
Rubber ring
6.2.1. Mounting instructions for Core and Fyre
!
Ensure to attach the Core and Fyre headlights to the handlebar only.
Place the rubber ring included in the scope of supply around the handlebar. Insert the locking
screw selected to fit the handlebar diameter into the side of the locking knob selected according
to the handlebar diameter and screw it into the handlebar holder. Place the handlebar holder
over the rubber ring with the locking button facing the saddle. Join the legs of the holder
underneath the handlebar and affix them using the locking screw.
! Please note: The locking knob can be used as a short or long version (simply turn as required)!
Short screw (30 mm)
Long screw (55 mm)
21